The Vanguard lockers have been the industry standard for rugged, dependable design for decades. The quick ship lockers are available in a wide variety of configurations and sizes and are among the
quietest on the market. Featuring doors with louvers, friction catch handle, and a powder coat baked enamel finish, they
withstand the daily use and abuse typically given to a locker. A practical storage unit where space is at a premium.
About the Materials and Finish
All locker body parts and shelves are made from prime grade 24 gauge mild cold rolled sheet steel free from surface imperfection, and capable of taking a high grade enamel finish. The doors are formed from one piece of 18 gauge steel. The powder coat baked enamel finish is electrostatically applied and available in Gray or Champagne for quick ship Vanguard Lockers. All locker body parts are finished in the same color.
About the Vanguard Locker Construction
Built on the unit principle - each locker has an individual door and frame, top, bottom, back, hooks with common intermediate uprights separating compartments. The welded door frames have mortise and tenon construction and are spot welded for lifetime rigidity. Features include:
- Compartment Size: 12"H x 12"W x 18"D
- Overall Specifications: 13.6”H x 45”W x 18”D, 43 lbs.
- Latch clips engage the door frame at two points on all doors
- Special nylon glides fastened to the latch channel assembly and rubber silencers minimize noise
- Friction catch 18 gauge door pull handles for padlock use
- Every door has a continuous door strike
- One set of 3 ventilation louvers
- Doors have two hinges
- Hinges are a full loop, 5-knuckle design
- Full channel formations are on the lock and hinge sides of the door to conceal and protect the lock bar and hinges
- Right angle flanges are on the top and bottom.
About the Additional Equipment Each locker has a
polished aluminum number plate attached to the door, 2-1/4" wide x 1" high, with black numerals not less than 3/8" high. If the starting number is not specified, 1 will be the standard start. The 4 Compartment wall lockers also includes a 45” long coat rack that can hang 16 coats.
About the Quick Ship Options
Slope tops are often used instead of flat tops to prevent the accumulation of dust and debris, and to discourage the use of locker tops as a storage areas. Two kits are needed for the 4 Compartment Locker. One kit contains 3 tops, 3 backs and 4 ends and the other 1 top, 1 back and 2 ends. We also offer factory assembly for your lockers (add 5 days to manufacturing time) and, because lockers must be floor or wall anchored for safety purposes, a set of concrete anchors.
About Additional Quick Ship Accessories
Standard vertical angle or wall angle (slip joint) fillers provide a professional, finished appearance. Fillers can be used to cover columns, pipes or other obstacles in a row of lockers, or fill the gap between the lockers and a wall. All filler styles are available in our Locker Accessories.
An End Row Panel should be ordered to complete your locker – whether a single wide or a an entire suite.
Your shopping cart is empty
