Hallowell H-Post High Capacity Shelving is ideal when additional strength is required for any shelving installation and is
recommended for multi-level high-rise shelving or storage applications. H-Post units are available in OPEN or CLOSED styles as well as STARTER and ADDER units.
Open Style Starter Units include four H-posts, one pair of back sway braces, two pair of side sway braces and shelves with shelf clips applicable to unit ordered.
Open Style Adder Units include two H-posts, one pair of back sway braces, one pair of side sway braces and shelves with shelf clips applicable to unit ordered.
Closed Style Starter Units include four H-posts, one set of back panels, two sets of side panels and shelves with shelf clips applicable to unit ordered.
Closed Style Adder Units include two H-posts, one set of back panels, one set of side panels and shelves with shelf clips applicable to unit ordered.
About the Design:
H-Posts are formed into a unique tubular design to provide more than twice the load capacity compared to standard posts. Posts are roll formed into an 1-1/2" wide x 2-15/16" deep tubular section. Rear flanges are welded on 6"centers to provide maximum strength. Sides of the post are punched 1-1/2" on center with 3/8" x 7/8" rectangular slots to receive shelf clips. Rear flanges of the post have holes punched on 3" centers for the attachment of side sway braces or field attached solid side panels. Post front is slotted on 3” centers for beam connection and combination clip attachment and is punched on 3” centers for field attached back connector strips.
Special triple point brace clips provide a strong and ridged anchor point for the cross braces. The standard foot plate provides a strong, secure anchoring point. Tops of shelves are punched to accept shelf dividers. Each shelf is installed using only 4 shelf clips and can be installed together with both beaded front and angle back posts as well as T-posts and H-posts.
About the Materials:
High Capacity posts are fabricated from 14 gauge cold rolled steel. Side and Back Sway Braces are formed from 11 gauge cold rolled steel strips. Foot Plates are 2-1/4" x 3-1/2" in size and are also fabricated from 11 gauge steel plate. A mounting bracket is welded on top. The bracket is punched for fastening to H-posts. The plate has a 7/16" diameter hole punched on one end to securely anchor the post to the floor.
Shelves are formed with two ribs along the horizontal front and rear edges. Heavy Duty shelves are fabricated from heavy gauge cold rolled steel and Extra Heavy Duty shelves are fabricated from extra heavy gauge cold rolled steel. All shelves have a roll formed rectangular tubular shaped front and rear edges with return bends welded to the under side of shelf. Welds are spaced 3" on center to provide maximum strength. Sides are triple flanged to form a channel. All four shelf corners are lapped and welded to provide a rigid corner and extra strength. Top surfaces of shelves are punched for attaching Shelf Dividers from left to right on 1-1/2" centers. Front and rear surfaces are punched for attaching accessories. The tubular front edge is designed to protect against impact loads. Posts and side sway braces are finished in a Marine Blue Powder Coat while shelves and back sway braces are finished in a Platinum Powder Coat.
About the Sizes:
Adder Units for H-Post High Capacity Starter Shelving Units with 8 Shelves are available in the sizes listed below. The shelf capacity is also included. Please note that shelf loads must be uniformly distributed.
Heavy Duty
- 36"W x 18"D x 87”H - 800 lb shelf capacity
- 36"W x 24"D x 87”H - 800 lb shelf capacity
- 36"W x 18"D x 123”H - 800 lb shelf capacity
- 36"W x 24"D x 123”H - 800 lb shelf capacity
- 48"W x 18"D x 87”H - 450 lb shelf capacity
- 48"W x 24"D x 87”H - 500 lb shelf capacity
- 48"W x 18"D x 123”H - 450 lb shelf capacity
- 48"W x 24"D x 123”H - 500 lb shelf capacity
Extra Heavy Duty
- 36"W x 18"D x 87”H - 1200 lb shelf capacity
- 36"W x 24"D x 87”H - 1250 lb shelf capacity
- 36"W x 18"D x 123”H - 1200 lb shelf capacity
- 36"W x 24"D x 123”H - 1250 lb shelf capacity
- 48"W x 18"D x 87”H - 900 lb shelf capacity
- 48"W x 24"D x 87”H - 900 lb shelf capacity
- 48"W x 18"D x 123”H - 900 lb shelf capacity
- 48"W x 24"D x 123”H - 900 lb shelf capacity
About the Features
- 14 Gauge Cold Rolled Steel Construction
- Available in a Variety of Sizes and Capacities
- Side and Back Sway Bars for Added Stability
- Durable Powder Coat Finish
- Suitable for Industrial Applications, Stockrooms, Tool Rooms or Garages
Your shopping cart is empty
