DuraTech is Hallowell's newest line of pass-thru steel shelving that requires
no cross braces to allow 360⁰ access to all shelves. DuraTech shelving provides maximum strength, durability and stability to handle most industrial applications. DuraTech offers versatility and durability for today's modern facilities. Shelving units are available in multiple sizes in 5, 7 and 8 shelf models.
Hallowell is proud to be Greenguard Certified for Indoor Air Quality. Greenguard is an indoor air quality certification program for low emitting products and materials including volatile organic compounds, carcinogens and reproductive toxins. Hallowell is committed to minimizing the environmental impact of their products and protecting indoor air quality.
About the Design
Innovative DuraTech Shelving from Hallowell replaces cumbersome cross braces with a unique and strong 4 bolts and steel-grip nut design at each corner. Four angle posts are used per section which allows units to be located individually, bolted size-by-side or back-to-back. Fixed shelves at the top and bottom of the units add to the rigid structure of this design. Three intermediate shelves are completely adjustable to suit your applications. Compression-shelf clips allow the shelves to be adjusted on 1-1/2 inch centers. The bottom shelf is seated on the floor to prevent debris from collecting beneath the unit. Shelf capacity varies with the unit size and is listed below in the “About the Sizes” section. Please note that shelf loads must be uniformly distributed.
DuraTech Shelving Units are shipped knock-down direct to you from the factory. All assembly hardware is included. Please note that many shelving orders arrive via freight truck. If you are a residential customer, have a clearance issue or need to have your order unloaded from the semi truck, please indicate in our shipping option. Liftgate or inside delivery will increase the shipping for this product. Please contact our customer service department for assistance.
About the Materials:
DuraTech Pass-Thru Shelving frames are fabricated from 14 gauge cold rolled steel. 3/8” x 7/8” slots on 1-1/2” centers allow positioning of the 3 intermediate shelves with Zinc plated 13 gauge shelf clips. Individual shelves are fabricated from 18 gauge cold rolled steel and are pre-punch at 1-1/2” centers to accept optional shelf dividers. Shelving units are finished with a durable Grey powder coat.
About the Sizes:
Five-Shelf DuraTech Pass Thru Shelving Units are available in the overall sizes listed below. The shelf capacity is also included.
- 36"W x 12"D x 87"H 800 lb shelf capacity
- 36"W x 18"D x 87"H 800 lb shelf capacity
- 36"W x 24"D x 87"H 800 lb shelf capacity
- 48"W x 12"D x 87"H 400 lb shelf capacity
- 48"W x 18"D x 87"H 450 lb shelf capacity
- 48"W x 24"D x 87"H 500 lb shelf capacity
About the Features
- 16 Gauge Cold Rolled Steel Frames
- Includes All Necessary Assembly Hardware
- Available in a Variety of Sizes
- Shelves Accessible from All Sides
- Durable Grey Finish
- Suitable for Industrial Applications, Stockrooms, Toolrooms or Garages
Your shopping cart is empty
